Non-Contact Sensor Selection Guide

| Home | State-Elec.com | About State | Contact |

Non-Contact Sensor Selection Guide

Membrane Rotary & Linear Sensors
	Membrane Potentiometers are available in designs that eliminate mechanical contact between the wiper and resistive material. An external actuating magnet pulls the conductive layer of the membrane potentiometer into contact with the resistive layer. The rated life is greater than 20 millions cycles.

Hall-Effect Rotary Position Sensors
	Series 6120 Hall-Effect Rotary Position Sensor is a new 7/8" device which features continuous rotation, ±0.5% independent linearity, and 0.2% maximum hysteresis. Rated rotational life of 10 million revolutions

	The HRS100 Hall-Effect Rotary Position Sensor provides a long life, cost-effective solution for harsh environments that include temperature, vibration, dither, moisture and dirt, with a rated life of more than 50 millions operations.

Optical Rotary Encoder
	Series 600E Optical Rotary Encoder is available is several terminal configurations, with a high resolution 2-bit grey code output of 128 pulses/revolution standard, and rated lifetime of 10 million revolutions.

Non-Contact Joystick Controls
	The J9 Contactless Inductive Joystick is available in 1, 2, or 3 axes configurations, with a 36° deflection angle. Rated for 15 million operations, this joystick also features high EMC immunity.

	The J3RH Single Axis Hall-Effect Rocker Joystick features a 30° deflection angle, with spring return to center and 3.0% linearity. This unit is rated for 5 million operations.

	The rugged J30H-XYZ-B Triple Axis Hall Effect Joystick features a 30° deflection angle, with essentially infinite resolution and 3.0% linearity.

	The JHE13 Contactless, Multi-axis USB Controller is a three axis, two button joystick built with Hall Effect sensors. This low-profile unit features a USB connection.