Series 600E Optical Rotary Encoder
|
|
| Description |
The Series 600E Control Optical Rotary Encoder features:
Direct digital output, high resolution, temperature stability, mounting flexibility, and continuous shaft rotation in either direction, together with a rotational life of over 10 million revolutions and a maximum operating speed of 300 rpm
|
|
|
|
|
|
|
|
Electrical Specifications
|
Input Power
|
5 volts DC ±5% @ 30ma maximum plus external requirements
|
Output Rate
|
128 pulses/revolution per channel, standard. Other pulses/revolution between 10 and 180 are available.
|
Channels
|
Two separate output channels in quatrature, 90° ±45°
|
Output Voltage
|
High level voltage - 2.4 volts minimum with 10 Kohm load to ground
Low level voltage - .4 volt maximum
|
|
|
|
Mechanical Specifications
|
Shaft Rotation
|
Continuous in either direction
|
Operating Speed
|
300 rpm maximum
|
Rotational Life
|
10 million revolution minimum
|
Rotational Torque
|
1.5 oz. in. maximum.
Other torque ranges available.
|
Shaft
|
1/4 in(6.35mm) diameter, standard;
1/8 in.(3.175mm) diameter available, stainless steel
|
Bushing
|
3/8 in.(9.53mm) diameter standard;
1/4 in.(6.35mm) diameter available, brass, nickel-plated
|
Shaft End Play
|
.005 in.(0.127mm) maximum
|
Shaft Radial Play
|
.010 in.(0.127mm) maximum @ 1 in.(25.4mm) FMS with 3/8 in.(9.53mm) long bushing
|
Axial Force
|
15 lb. minimum push or pull force applied to shaft end
|
Terminals
|
PC Type: .025 in.(0.635mm) by .012 in.(0.305mm) thick brass, gold plated to facilitate soldering. Cable type: Four lead ribbon cable, color-coded, with .050 in. (1.27mm) spacing, 28 AWG.
|
Terminal Strength
|
Terminals withstand 2 lb. push or pull and a 90° bend.
|
Mounting Hardware
|
3/8 in. bushing, hex mounting nut 3/8 in.(9.53mm) x 32 thread, 1/2 in.(12.7mm) across flats, 3/32 in. (2.38mm) thick internal tooth lockwasher 11/16 in.(17.46mm) OD, .022 in.(0.56mm) thick.
|
Seals
|
Mounting seal and shaft seal available.
Controls are not sealed for board washing.
|
Marking
|
Consists of customer or Clarostat part number and EIA source and date code. Ink stamped on periphery of the control meets EIA RS230 & RS327 specifications.
|
Weight
|
PC type or cable type:
1 in.(25.4mm) FMS shaft and 3/8 in.(9.53mm) bushing: .046 lb.(21 gm.)
|
Locating Pin
|
Single pin located 17/32 in.(13.49mm) from center can be supplied. Pin withstands 5 in. lb. torque.
|
|
|
|
Environmental Specifications
|
Storage Temperature
|
-55°C to +110°C
|
Operating Temperature
|
-40°C to +65°C
|
Humidity
|
85% R.H. @ 40°C 240 hours
|
Vibration
|
10 to 1000 Hz, 15 G peak MIL-STD 202,
Method 204, Test C
|
Shock
|
100G @ 6 MS per MIL-STD-202,
Method 213, condition I
|
|
|
|
|
|
|
|
|
|
|